Tubes: All Sizes/Types
Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve
The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm
Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Schrader Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.
Page 1 of 1